Telephone
444 50 48
E-mail
laboratuvar@cedfem.com.tr
Working hours
08:30 - 18:00
Turkish
Analysis Services
» » » Air Quality Measurements

Air Quality Measurements

All gases and particulates in the atmosphere which are measured and breathed are called immission.

Which operators have to carry out the Air quality measurements?
  • The hourly mass flow (kg / h) values determined by using emission factors for newly installed facilities, which are measured for preexisting facilities for existing facilities, the facilities exceeding the limit values given in Table 2.1 of the Regulation on Control of Industrial Air Pollution,
  • Hourly mass flow (kg / h) values determined using emission factors for plants emitting off-shore sources above the values given on the Regulation on Control of Air Pollution from Industry Table 2.1
  • The organization stated in Annex 1 by the Ministry of Urbanization and Environment.
What is the relationship between Air Quality and Environmental Permit and License Regulations?
Enterprises subject to Environmental Permit and License Regulations should make their measurements by means of the laboratories authorized by the Ministry of Environment and Urbanization according to the emission parameters belonging to the sector in the Regulation on the Control of Industrial Air Pollution with respect to the sources of their own. Measurements should be repeated every two years if there are no changes.

Who can measure?
TÜRKAK accreditation and Ministry authority are sought in the laboratory to be measured. In addition, there is a requirement that the personnel to be measured should be certified by attending the training given by the Ministry.

ÇEDFEM is the most experienced organization in environmental analysis and authorized by the Ministry of Environment and Forestry in 2003 and accredited by TÜRKAK in 2004.

The experience of gained through years in the sector led the CEDFEM Laboratory be over the country standards in the multitude of measurement and analysis parameters. ÇEDFEM has been shown one of the best example in the sector by different authorities.

  • Parameters

      Mass Flow Calculation Using Emission Factors
      Air Quality Modeling
      Mass Flow Rate Calculation Using EPA Tanks Software
      Nitrogen dioxide NO2
      Passive Sampling
      PM 10
      Dust
      Heavy Metal in dust

  • References

      TOFAŞ TÜRK OTOMOBİL FABRİKASI AŞ
      TIRSAN TREYLER SANAYİ TİCARET VE NAKLİYAT A.Ş
      MAN TÜRKİYE AŞ
      CND İNŞAAT TAAHHÜT YOL YAPIM MADENCİLİK SAN. VE TİC.
      OYAK RENAULT OTOMOBİL FABRİKALARI
      BİS ENERJİ
      BORUSAN MANNESMANN SAN. TİC. A.Ş.
      FORD OTOMOTİV SANAYİ AŞ
      BP PETROLLERİ A.Ş.
      BURSA BÜYÜKSEHİR BELEDİYESİ
      BURSA NİLÜFER BELEDİYESİ
      ERİŞSAN BETON VE KUM SANAYİ A.Ş.
      SİNTA SANAYİ İNŞ TAAH.VE TİCARET A.Ş.
      TRAKYA YENİŞEHİR CAM SAN. A.Ş.
      ANADOLU CAM SANAYİİ AŞ
      KARAYOLLARI GENEL MÜDÜRLÜĞÜ 1.BÖLGE MÜDÜRLÜĞÜ
      YALOVA ÖZEL İDARESİ
      COMPENENTA DÖKÜMCÜLÜK
      ÇELEBİ BANDIRMA ULUSLARARASI LİMANI İŞLETMECİLİĞİ A.Ş.
      EUAŞ ELEKTRİK ÜRETİM A.Ş. 
      TOTAL MADENİ YAĞLAR
      SANÇİM BİLECİK ÇİMENTO MADENCİLİK BETON SAN. TİC. A.Ş. 
      SERANİT GRANİT SERAMİK SANAYİ TİCARET A.Ş
      VESTON BEYAZ EŞYA İMALAT SAN.VE TİC.LTD.ŞTİ.

27-10-2017, 12:45 / Environmental Analysis
Tags:

Add a comment

  • Okunamayan kodu yenilemek için resmin üstüne tıklayınız

up